Mondo Robotics’ Beni, a four-pound wheeled camera robot that the company says can follow you, jump 10 inches and film in 4K, is no longer a Kickstarter promise. A Nov. 10 company announcement said the Standard Combo is $799 and the Explore Combo $959, shipping to North America, the EU, the UK, Australia, New Zealand and China. On Nov. 12, Mondo’s product page listed those kits in stock at $749 and $899, with estimated delivery in three to seven business days. We did not find a verified Amazon.com listing.
Key points
- Mondo’s Nov. 10 release priced the Standard Combo at $799 and the Explore Combo at $959. On Nov. 12 the company’s store listed them at $749 and $899, in stock, with three-to-seven-day delivery estimates.
- Mondo says Beni weighs 4 pounds, records 4K at up to 60 fps on a 1/1.3-inch sensor, runs about 90 minutes per battery, jumps up to 10 inches and reaches 17.9 mph, with on-board filming and tracking.
- The company also says Beni can “avoid most obstacles and won’t bump into people.” Hands-on reviews from The Verge and SlashGear, written before general retail, found tracking and obstacle avoidance unreliable around trees, gates, walls and even a reviewer’s foot.
- Beni is not waterproof, has a 15-day return window and a one-year limited warranty that excludes misuse. Futureshock has not tested one.

What’s in the box, and what Mondo claims
Beni is a bipedal, two-wheeled follow-cam about 6.54 by 8.46 by 8.58 inches, not a drone and not a humanoid. The Standard Combo, in Mondo’s November release, includes the robot, a motion tracker and wristband, a hat, a chest protection plate and one battery. The Explore Combo adds two more batteries, off-road wheels and a charging hub. The store still describes those kits that way; only the prices have dropped from the announced $799 and $959.
The official spec list is tidy, and it is Mondo’s: a 1/1.3-inch CMOS sensor, f/2.8, ISO 100 to 25,600, a 155-degree field of view, 4K 16:9 at 30 or 60 fps, 3K 16:9, 1080p up to 120 fps, and vertical 3K (1,728 by 3,072) for social clips. Storage is 32GB built in plus a microSD slot. Mondo says filming and tracking happen entirely on the device. Battery life is “approx. 90 mins” on one pack, with a 60-minute charge. Max speed is listed at 17.9 mph (28.8 km/h) and max jump at 10 inches (25.4 cm). Operating temperature is 32°F to 104°F. The company says it can be set up in under five minutes and that a self-recovery system stands the robot back up if it tips over.
Mondo also says Beni is “optimized to follow people and dogs,” can climb stairs by jumping, and has “sophisticated” obstacle avoidance so it “won’t bump into people as it tags along in your daily life.” That last claim is the one to treat as a claim.
What reviewers actually ran into
Futureshock has not used Beni. The useful evidence is from people who did, mostly on pre-retail units. In a July preview, The Verge’s Sean Hollister spent about two hours with an early Beni in Oakland. He found the jumping and self-righting “so much fun,” and said the robot took walls and ledges “with no more than a deep scuff.” He also could not fully test automatic following, had to trigger tracking modes by hand, and watched Beni “clipping corners, smacking walls, or even running into my foot” while trying to keep up with a kick scooter. It did better when he simply walked. Hollister wrote that Mondo is led by DJI veterans, and that a company spokesman said it has no other connection to DJI and builds the robot in-house. The Verge described the company as Shenzhen-based; Mondo’s November release is datelined Palo Alto. We have not independently resolved that.
SlashGear’s Adam Doud, in a September review after several weeks with a unit, was blunter about the same gap. “The obstacle avoidance of this robot absolutely sucks,” he wrote. Beni lost his dog around a tree, lost Doud at a fence gate, and “drove right into a can” on trash day. It recovered from curbs and a nine-inch deck drop, and it shone on an open street behind a scooter. He also said that in that test it “maxes out in speed at about 10mph,” well short of Mondo’s 17.9 mph figure. The camera was “basically fine” in daylight, “a tad grainy” in shadows, and locked to a very low angle, “shot from four inches off the ground.” He would not recommend it until avoidance improves, except perhaps for open-field sports or pet video.
Those tests predate the Nov. 10 general sale. Software can change. They are still the most detailed public accounts we have, and they cut against the “won’t bump into people” line. PetaPixel, reporting the retail launch, said Mondo told it more than 5,000 robots had already shipped to Kickstarter backers in October, after a campaign that the company says hit $5 million.
Who should buy it, and who should skip it
The other limits are clearer. Mondo’s FAQ says Beni “is not waterproof” and should stay out of rain and puddles. Returns are 15 days from delivery, in good working condition with the accessories. The one-year limited warranty covers manufacturing defects, hardware failures under normal use and factory software faults, and explicitly excludes damage from misuse. A robot that reviewers have watched hit fences and trash cans makes that exclusion worth reading twice. Working temperature stops at 32°F, so winter sidewalks are outside the official envelope.
Buy it if you want a weird, pet-able follow-cam for open spaces, you like the idea of a jumping RC camera as much as the footage, and you can live with a 15-day return if the avoidance still disappoints. The current $749 Standard price is $50 below the November list price, and the $899 Explore kit is $60 below its announced $959, as of our Nov. 12 check of the Mondo store. That could change.
Skip it if you need a robot that will reliably not hit people, furniture or dogs in a cluttered yard; if you wanted a listing on Amazon (we could not verify one); if you need weather sealing; or if you were hoping for a high, phone-like camera angle. Mondo’s own marketing video will make the case better than we will. The reviews say the fun is real, and so are the bumps.
Hype in. Signal out.
Lead image: Official product photo of Mondo Robotics’ Beni camera robot, from the company’s store and Nov. 10 launch announcement. It shows the robot itself. Source: Mondo Robotics.








